Loading... Please wait...Currency Displayed in
- Home
- KNX Products
- Cooling & Heating
- Heating Actuators
- KNX Basic Heating Actuator 6-G - 2336 REG HZ B
Categories
Related Products
-
Jung Jung KNX Heating Actuator 6-G with Controller - 2336 REG HZR HE PLN1,290.30 (inc VAT) PLN1,075.26 (ex VAT)
-
-
-
-
KNX Basic Heating Actuator 6-G - 2336 REG HZ B
Hover over image to zoom
Jung
Product Description
Rail mounting device, 4 rail units
6 outputs "TRIAC"
ETS product family: Heating, A/C, Ventilation
Product type: Valve
Intended Use
Switching of electrothermal actuators for heaters or cooling ceilings
Installation in distribution boxes on DIN rail according to EN 60715
Characteristics
- Switching operation or PWM operation
- Actuators with characteristics opened or closed without power
- Valve drives for 230 V or 24 V controllable
- Disabling of individual outputs via bus
- Overload-protected, short circuit-protected
- Protection against jamming valves
- Cyclical monitoring of the input signals can be parameterised
- Feedback via bus, e.g. in case of overload or sensor failure
- Extended functions for optimisation of the heat demand (boiler and pump)
- 1 bit control value input
Technical Details
| Power loss: | max. 1 W |
| Rated voltage KNX: | DC 21 ... 32 V SELV |
| Power consumption KNX: | max. 250 mW |
| Ambient temperature: | -5 ... +45 °C |
| Storage/transport temperature: | -25 ... +70 °C |
| Heating outputs | |
| Contact type: | semiconductor (triac), ε |
| Switching voltage: | AC 24 / 230 V ~ |
| Mains frequency: | 50/60 Hz |
| Switching current: | 5 ... 160 mA |
| Switch-on current: | max. 1.5 A (2 s) |
| Switch-on current: | max. 0.3 A (2 min) |
| Number of drives per output | |
| 230 V drives: | max. 4 |
| 24 V drives: | max. 2 |
| Mounting width: | 72 mm (4 rail units) |
| Connection, outputs: | screw terminals |
| single wire: | 0.5 ... 4 mm² |
| stranded without ferrule: | 0.5 ... 4 mm² |
| stranded with ferrule: | 0.5 ... 2.5 mm² |