Loading... Please wait...Currency Displayed in
- Home
- KNX Products
- Energy & Measurement Monitors
- KNX Energy Detector 3-G - 2103 REG ES
Categories
Related Products
-
-
-
-
-
Eelectron Eelectron KNX Presence Detector Basic - PD00E00KNX£229.20£160.80 (inc VAT)£191.00£134.00 (ex VAT)
KNX Energy Detector 3-G - 2103 REG ES
Hover over image to zoom
Jung
Product Description
Rail mounting device, 4 rail units
ETS product family: Physical sensors
Product type: Energy detector
Characteristics
The energy detector has three channels for connecting loads to up to three separate phases with a common neutral conductor. Each channel can measure:
- Voltage (eff.)
- Current (eff.)
- Active power
- Reactive power
Additionally, the active power and reactive power of all channels will be summed up and displayed as three-phase power values along with the mains frequency. According to the parameterisation the measured values will be transmitted on the KNX bus, either cyclically and / or when the value changes. An additional telegram will be transmitted if certain values exceed or fall below a specified limit.
The following meters exist for each channel and for the three-phase values:
- 1 x energy meter total
- 1 x energy meter ¼ h value
- 3 x energy meter n
- 3 x energy intermediate meter n
- Direct measurement (without transformer)
- Transformer measurement (with external 75 A transformer, ratio 75:5, e.g. Phoenix Contact order key 2277611)
Technical Details
| Power supply via E1/N | |
| Rated voltage: | AC 110 ... 240 V ~ |
| Mains frequency: | 50/60 Hz |
| Power consumption: | max. 2 W |
| Inputs E1 ... E3 | |
| Rated voltage range: | AC 110 ... 240 V ~ |
| Rated current range: | 4 mA ... 16 A |
| Rated frequency: | 50/60 Hz |
| Measurands: | voltage (rms value) current (rms value) frequency active power (signed +/-) reactive power (signed +/-) active energy (signed +/-) |
| External transformer | |
| Transformation ratio: | 75:5 |
| Secondary current: | 0 ... 5 A |
| Accuracy: | |
| Direct measurement (without transformer): | 1 % of 200 mA ... 16 A |
| Transformer measurement (75 A transformer, class 1): | 2 % of 7.5 A ... 75 A |
| Pulses LED: | |
| Direct measurement (without transformer): | 6400 / kWh |
| Transformer measurement (75 A transformer): | 427 / kWh |
| Pulse duration: | 4.9 ms |
| Power loss | |
| Voltage measurement: | ≤ 0.03 W / phase |
| Current measurement: | ≤ 0.8 W / phase |
| Power consumption from mains: | < 1 W |
| Connection | |
| Connection mode: | screw terminals |
| single wire: | 0.5 ... 2.5 mm² |
| stranded without ferrule: | 0.5 ... 2.5 mm² |
| stranded with ferrule: | 0.5 ... 2.5 mm² |
| Ambient temperature: | -5 ... +45 °C |
| Storage/transport temperature: | -25 ... +70 °C |
| Mounting width: | 72 mm (4 rail units) |
| KNX medium: | TP 256 |
| Rated voltage KNX: | DC 21 ... 32 V SELV |
| Current consumption KNX: | typical 10 mA |
| Connection, KNX: | terminal |