The KNX IP Interface 751 is the successor of the well-tried KNX IP Router 750. The new compact design has a width of only 1 module (18 mm) and is powered by the KNX bus. The device forwards telegrams between different KNX TP lines via LAN (IP) as a fast backbone and is an alternative to KNX line coupler.

The KNX IP Router 751 can also be used in the ETS® as a programming interface. The KNX IP Router 751 has a full-range filter table and a large telegram buffer.The buttons and LEDs on the device allow a local diagnosis including the operating status and communication errors.

Technical Details

Mechanical data: 
-Housing: plastic
-DIN rail mounted device, width: 1 TE

Controls and indicators : 
-2 buttons + KNX programming button
-3 LEDs bicolor + KNX programming LED

Ethernet:
-10BaseT (10Mbit/s)
-5 KNXnet/IP Tunneling connections

KNX:
-Medium IP/TP
-Filter table 8 kByte (64k group addresses)

Power supply: 
-From KNX Bus, approx. 15 mA

Connectors: 
-KNX Bus connector
-LAN RJ-45 socket 

Downloads 

Data sheet
Manual 
ETS File 
Remote Access with ETS