Currency Displayed in
The output channels can be parameterised for different current and voltage signals to control different analogue variables (e.g. servomotors). The actuator has four analogue outputs. For use in connection with the analogue actuator module REG/4-gang, 8 analogue outputs are provided. Connections are made using the sub-bus. For installation on DIN rails EN 50022.
The bus is connected using a bus connecting terminal; a data rail is not necessary. With continuity checking of the current outputs.
BUS type: | KNX |
Total number of 18 mm modules: | 4 |
Mounting support: | DIN rail |
Output current: | 0...20 mA |
Output voltage: | 230V @ 50 Hz |
Number of outputs: | 4 |
IP degree of protection: | IP20 |