Loading... Please wait...Currency Displayed in
- Home
- KNX Products
- Cooling & Heating
- Heating Actuators
- Heating Actuator 8 In / 8 Out - HA08A01KNX
Categories
Related Products
-
Eelectron Eelectron Universal 8 IN / 8 OUT Module - IO88E01KNX ¥67,656.73 (inc VAT) ¥56,380.28 (ex VAT)
-
Eelectron Eelectron Universal 8 OUT Actuator With Manual Control - BO08B01KNX ¥60,245.76 (inc VAT) ¥50,204.15 (ex VAT)
-
Eelectron Eelectron Heating Actuator 4 In / 4 Out - HA04A01KNX ¥42,950.23 (inc VAT) ¥35,792.52 (ex VAT)
-
-
Eelectron Eelectron Heating Actuator 8 Inputs / 4+4 Outputs - HA88B01KNX ¥60,577.54 (inc VAT) ¥50,480.95 (ex VAT)
Heating Actuator 8 In / 8 Out - HA08A01KNX
Hover over image to zoom
Eelectron
Product Description
The HA08A01KNX device is a EIB/KNX DIN rail actuators for electrothermal valves with 8 Triac outputs at 24… 230V AC; the devices include 4 inputs for dry (potential-free) contacts.
The outputs can be configured as:
- 8 channels for valve control in ON / OFF or PWM
- 4 channels for 3-points valve control
Inputs can be connected to buttons or switches (potential-free) and can be used for on / off commands, dimming, shutters or blinds / scenarios, sequences, step commands, etc. Inputs from 1 to 4 can be configured as outputs to activate single signaling LEDs (see eelectron leds code LD00A01ACC / LD00A11ACC) or can be configured as analogue inputs for the connection of NTC temperature probes (see eelectron probes code TS00A01ACC / TS00B01ACC ) with which to send 4 temperature measurements on the bus or to manage 4 complete thermostat modules. Each thermostat module manages 2 stages with an integrated PI controller for controlling heating and cooling equipment, valves, 2 and 4 pipe fan coils, etc.
Additional 4 thermostat modules are available in the device for a total of 8. Moreover, 8 logic blocks are available to implement simple expressions with logical or threshold operator or complex expressions with algebraic and conditional operators; It’s possible to use predefined algorithms as proportional controls of temperature and humidity or dew point calculation. Device is equipped with KNX communication interface and is intended for installation on DIN rail in LV distribution cabinets
Technical Details
| Power Supply: | |
| Via bus EIB/KNX cable: | 21 ÷ 32V DC |
| Current consumption: | ≤ 15 mA |
| Triac Output: | |
| Voltage: | 24 V AC .. 230 V AC 50/60Hz |
| Rated current (per output): | 500 mA |
| Inrush current (every group of 4 outputs): | 4A |
| Max valves per output @ 24 V AC: | ≤ 3* |
| Max valves per output @ 230 V AC: | ≤ 4* |
| * This value depends on the manufacturer of the electrothermal valves; check the inrush current value for each output and do not exceed the maximum of 4A for each group. Use activation delay between simultaneous communtation to reduce the total inrush current. | |
| Terminals | |
| Maximum wire gauge solid and stranded: | 2.5 mm2 |
| Input - Digital Mode | |
| For free potential contacts | (dry contacts) |
| Max. length of Cables (twisted): | ≤ 30 m |
| Voltage Scanning: | 3,3 V DC |
| Input - Analog Mode (for temperature probe) | |
| TS01A01ACC | (range from -20°C to +100°C) |
| TS01B01ACC | (range from -50°C to +60°C) |
| Max. length of Connecting Cable: | ≤ 30 m (twisted cable) |
| Mechanical Data | |
| Case: | (PC-ABS) |
| Dimensions: | 4 DIN Modules |
| Weight: | approx. 200 g |