Loading... Please wait...Currency Displayed in
- Home
- Manufacturers
- Otomo
- System Components
- DALI Module 2 Channels x 8 ECG Broadcast - IO14A01BLE
Categories
Related Products
DALI Module 2 Channels x 8 ECG Broadcast - IO14A01BLE
Hover over image to zoom
Product Description
The IO14A01BLE device is a component of the OTOMO system and is equipped with 2 channels to manage up to 8 DALI ballasts per channel and 2 16 A relay outputs that can be configured as independent to control lights or generic or combined loads for driving a shutter or roller blind. The outputs for driving the DALI drivers can be used as independent or can manage 1 channel of “warm” light and one of “cold” light to reach the desired color temperature. The device IO14A01BLE integrates the HCL (Human Centric Light) management and is able to automatically manage the luminous flux and the color temperature of the light according to the circadian cycle. The measurement of the ambient temperature and brightness is performed by the OTOMO sensor connected to the device cod. IO42A01BLE or from the sensors on the lamp Jackie_IoT (code BO03P01BLE).
The device also has 1 input for clean contacts, which can be used to control one of the 4 local output channels. The combination between the input and the output takes place through a procedure to be performed locally on the device. The device is configured via OTOMO APP for smartphones available for operative system iOS and Android stores and is intended for installation on DIN rail in Low Voltage distribution cabinets. WARNING: IO14A01BLE and its interface for DALI drivers do not meet the requirements of IEC 60929. Connect directly to the DALI LED drivers to be controlled, do not connect to an existing DALI network.
Technical Details
| Supply Voltage: | 230V AC 50/60Hz |
| Power Consumption: | < 2 W |
| Relay Output: | 16 A cos φ 1 - 230 V AC / 8 A cos φ 0.6 - 230 V AC |
| Minimum switching current: | 10mA |
| Max current relay output: | 16A/16AX(140μF) |
| Max peak current: | 165 A / 20 ms |
| Incandescent lamps: | max 10 A |
| Motors e motor reduction units: | max 10 A |
| Fluorescent lamps (max 140 μF): | max 3A (700W) |
| Electronic ballast: | max 6 A |
| Output for DALI drivers | |
| Voltage: | 20V DC |
| Max. number of drivers: | 8 |
| Input (For free potential contacts / dry contacts) | |
| Max. length of Cables (twisted): | ≤ 10 m |
| Voltage Scanning: | 3,3 V DC |
| EXT. SUPPLY (This terminal is intended to supply power to an auxiliary presence detector) | |
| Voltage supplied: | 20 V DC |
| Maximum current: | 150 mA |
| Mechanical data | |
| Case (PC-ABS): | 8 DIN Modules |
| Weight: | 220g |
Downloads
Datasheet
Brochure (PDF)
Quick Start Guide (PDF)
OTOMO APP
