Currency Displayed in
6 channel CANx relay extension is designed to be used in building and industrial automation applications as an extension module to LogicMachine series devices based on CAN FT bus and LoRa 433 wireless. The configuration and monitoring of the device is done through separate LogicMachine CANx application. The device is designed for DIN-rail mounting and requires 4 DIN-units.
- 6 x 10A 250VAC Relays
- 1 x CAN FT
- 1 x LoRa 433 Mhz transceiver with antenna (adjustable bandwidth / distance)
- Can be used with wired or wireless media, or as gateway between wireless-wired
- 4 DIN
- CANx configurator is freely available from LM app store
Power supply | 12-32V DC |
Power consumption (at 24V) | 10 mA (LoRa not active, relays off), 25 mA (LoRa peak load, relays Off), 76 mA (LoRa peak load, relays on) |
DC overvoltage protection | 50 V |
Wrong wiring polarity protection | Yes |
Interfaces & Operating Elements | |
Relays | 6 |
Rated voltage/current | 250V AC (10A), 30V DC (5 A) |
USB | 1 microUSB for upgrade firmware flashing |
CAN FT | 1 |
LED | 1 – CPU load, 1 - Error, 2 – RX/TX LoRa, 6 - Relay status |
Relay manual operating buttons | 6 |
Programming/reset button | 1 |
Clamps & Enclosure | |
CAN FT Terminal | 0.8mm2 |
Relays | 5 mm2 |
Power supply | 5 mm2 |
Color | Gray |
Dimensions | 70(W)x91(H)x68(L) mm |
Protection | IP20 according to EN 60529 |
Usage temperature | -5C ... +55C |
Storage temperature | -20C ... +70C |
Net weight | 158 g |
LoRa Specification | |
Power on transmitter | 1.6-50 mW (software adjustable) |
Frequency range | 433-434,750 MHz |
Channel bandwidth | 125 / 250 / 500 kHz |
Carrier frequency step | 125 kHz |
Spreading factor | 7-12 |