Function Description

- Passive infra-red presence detector KNX for flush-mounted ceiling installation
- Circular detection area 360°,Ø 24 m, (452 m2) at mounting height 3 m
- 2 channels light and 2 channels presence
- 2 channel light C1, C2 with 1 light measurement
- 2 presence channels can be parametrized individually
- Adaptable 1 channel light measurement
- Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
- Can be used as fully or semi-automatic, switchable
- Switch or constant light control mode with stand-by function
- Dimmable lighting in switch mode with stand-by function
- Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
- Teaching in of the brightness switching value or the set point value
- Room correction factor setting for ­brightness measurement calibration
- Light time delay can be set using parameters, on the device itself or via remote control
- Switch on delay and time delay ­for presence can be set
- Detection sensitivity can be set
- Reduced time delay in the event of a shorter stay in the room (short presence)
- Scenario functions
- Test mode for checking function and detection range
- Sensitivity adjustable
- Detection area can be limited using cover clip
- Manual override using telegram or remote control
- Parallel switching of several detectors in Master/Slave or Master/Master possible
- Ceiling installation in flush-mounted socket
- Ceiling installation also possible with surface-mounted frame
- User remote control and management-remote control (optional)

Technical Details

Detection Area

Downloads

Datasheet
Operating Instructions
Operating Instructions (Smartphone)
Hand book
ETS File

Accessories

Ceiling installation box 68A - 9070992
Cover 110 GR - 9070591
Masking clip - 9070921
QuickSafe - 9070531
Surface frame 110A WH - 9070912
theSenda B - 9070985
theSenda P - 9070910
theSenda S - 9070911