Currency Displayed in
Indoor movement detector with anti-crawl protection. When a movement is detected, a data telegram defined by the programming is transmitted.
With integrated bus coupling unit. For wall mounting in a size 60 mounting box, optimal installation at 2.2 m.
KNX software functions:
- Five movement blocks: up to four functions can be triggered per block
- Telegrams: 1 bit, 1 byte, 2 bytes
- Normal operation, master, slave, safety pause, disable function
- Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer
- Two movement sensors: the sensitivity and range can be set separately for each sensor
- Self-adjusting staircase timer
Frames for this product are sold separately here: link
Angle of detection: | 180° |
Range: | 8 m right/left, 12 m to the front (for a mounting height of 2.20 m) |
Mounting height: | 2.2 m or 1.1 m with half the range |
Number of levels: | 6 |
Number of zones: | 46 |
Number of movement sensors: | 2, sectororientated, adjustable |
Sensitivity: | infinitely adjustable (ETS or potentiometer) |
Light sensor: | infinitely adjustable from approx. 10 to 2000 Lux (ETS or potentiometer) Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS) |
EC Directives: | Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC |
KNX- ARGUS 180/2.20 m Flush-Mounted Movement Sensor-Operating instructions (EN) (Version 0)
KNX- ARGUS Presence Detector-180/2.20 m-ETS Software Description (EN) (Version 0)
dshe_KNX ARGUS 180/2.20 m flush-mounted, polar white, glossy, System M (Version 1.0)