Currency Displayed in
SK10-TC-RPTF1 is KNX temperature sensor used for indoor / outdoor and damp locations (IP54/65). PT1000 temperature sensor in the thermowell. Assembly in the room with large ceiling heights hanging down from the ceiling sensor.
The housing is suitable for wall mounting and is mounted with 2 screws.
- Air temperature ( pendulum room sensor ) also weighted with external temperature
- Control functions for heating and cooling applications ( can be combined )
- Setpoint temperatures for Comfort, Standby, Economy and Protection, selectable via KNX HVAC objects
- Setpoint change via objects
- Storage of minimum- and maximum-temperature
- Heat- and frost-alarm
- Limits for temperature
- Fan control by external inputs
- Adaptation for setpoint and maximum temperatures
- Controller output 0…100% or programmable PWM for thermal actuators
- Valve rinse function
- Second temperature controller as auxiliary controller
Four logic blocks for the logical link between internal and external signals
- 10 associated logic inputs / outputs
- Heat- and cooling-request as additionally available signals
- Functions "AND, OR, NOT, XOR" for binary logic
- Functions "+ - *" for 8-bit values
- Function "=" for conditional forwarding of events
Measurement: | Temperature |
Control: | Integrated |
Temperature Range: | -30 .. +75°C |
Resolution: | ± 0,01°C |
Accuracy: | ± 0,3°C + accuracy of the sensor |
Operating Voltage: | KNX Bus Voltage 21 .. 32VDC |
Power Consumption: | approx. 240mW ( at 24VDC ) |
Environment Temperature KNX-Module: | Storage: -20 .. +85°C Operating: -20 .. +80°C |
Environment Humidity KNX-Module: | 0 .. 95% r.H Non Condensing |
Bus Coupler: | Integrated |
Auxiliary Supply: | Not Required |
Startup with the ETS Version 4 or higher: | HLK305 |
Curcuit Points: | KNX 2-Pole Clamps ( red / black ) |
Protection Class: | IP54/65 |
Housing KNX-Module: | Plastic |
Dimensions Housing KNX-Module: | ( 72 x 64 x 40 ) mm |
Article Number: | 30511050 |