Loading... Please wait...Currency Displayed in
- Home
- KNX Products
- Energy & Measurement Monitors
- SK08-T8 8-Channel Temperature Controller
Categories
Related Products
-
Arcus Arcus SK08-BFT-WMT Soil Moisture & Temperature Sensor ¥69,765.45 (inc VAT) ¥58,137.87 (ex VAT)
-
Arcus Arcus SK08-BFTLFT-AFF-WMT Soil Moisture & Temperature + Air Humidity & Temperature Controller/Sensor¥87,557.04¥78,801.34 (inc VAT)¥72,964.20¥65,667.78 (ex VAT)
-
-
Arcus Arcus SK08-Ventil4 On-wall 4-Channel KNX Valve Controller 24VDC ¥36,386.76 (inc VAT) ¥30,321.98 (ex VAT)
-
![[A/AS]Room Temperature Controller](https://cdn10.bigcommerce.com/s-w1f4078i/products/5365/images/9266/JUNG_A2178AL__23397.1581354099.168.168.png?c=2)
SK08-T8 8-Channel Temperature Controller
Hover over image to zoom
Arcus
Product Description
The KNX Sensor SK08-T8 8-Channel Temperature is a sensor / controller from the S8 series and used for measuring and controlling 8 separate temperatures which are recorded by an external PT1000 temperature sensor.
Several temperature sensors can be used and Arcus-EDS provides a multitude of accessories such as sleeve / screw-in / ceiling / and feed sensors for many diverse applications.
The device has an integrated KNX bus coupler and does not require additional voltage.
The transducer is located in a high-strength, extremely robust stable impact ABS plastic housing. Cover and base have a revolving groove and tongue system with neoprene gasket. The housing is IP54.
In the application software a separate controller ( 2-position or PI controller with continuous or pulsed output ) is available for every channel.
Other functions include maximum and minimum thresholds and a help key where the set point and thresholds can be switched.
The sensor is configured with ETS ( Tool Software ) and the application program. Controlling functions such as signal threshold and diverse adjustments are set using ETS.
The temperature probes ( PT1000 ) are not included in delivery.
(Links to all avaliable PT1000 probes below).
Applications
- General surveillance and controlling of temperatures
- Surveillance and controlling of temperatures for heating and cooling and temperature logging
Technical Details
| Measured Data: | 8x Temperature |
| Sending Options: | no sending, cyclical sending when change occurs |
| Parameter: | Cyclical sending with variable periods, sending when change occurs with hysteresis |
| Object type T1 .. T8 | 1-Byte signed, 2-Byte signed, 2-Byte-float, 4-Byte-float |
| Controller Modi: | Steady PI controller Switched PI controller (PWM) Two-Position controller Two-Position controller Pulsed |
| Parameter Steady PI controller: | Setpoint, reset time, proportional factor, controller mode |
| Parameter Switched PI controller (PWM): | Setpoint, reset time, proportional factor, controller, cycle duration, threshold pitch |
| Parameter Two-Position controller: | Setpoint, differential gap, controller mode |
| Parameter Two-Position controller Pulsed: | Setpoint, differential gap, controller mode , cycle duration, duty cycle |
| Lock Function: | All controller parameterizable as enable or lock |
| Controller Variables Output: | depends on Controller Modi 1-Byte unsigned, 1-Bit Switch |
| Setpoint value send cyclical: | None or 10-250 seconds, parameterizable |
| Limits T1 .. T8: | Lower limit, Upper limit |
| Auxiliary value T1 .. T8: | Setpoint, Upper limit or Lower limit |
| Bus power failure: | Saving changed auxiliary quantities, parameterizable |
| Measured value shift: | T1 .. T8 |
| Ambient Temperature Electronic Measuring Equipment Casing: | Operation: -20 .. +80°C Storage: -20 .. +85°C |
| Ambient Humidity: | 0 .. 95% rH not condensating |
| Accuracy: | ± 0,3°C |
| Resolution: | ± 0,01°C |
| Operating Voltage: | KNX bus voltage 21 .. 32VDC |
| Power Consumption: | approx. 240mW ( at 24VDC ) |
| Auxiliary Supply: | not required |
| Bus Coupler: | integrated |
| Start-up with ETS: | ARC_S8 Product: S8-T8 |
| Curcuit Points: | 2-pole clamps ( red / black ) |
| Protection Class: | IP54/65 |
| Assembly Type Transducer: | Assembly with 2 screws finery |
| Casing Transducer: | ABS plastic grey |
| Casing Dimensions: | ( 115 x 65 x 55 ) mm ( L x W x H ) |
| Article Number: | 30801000 |
| Probes: | PT1000 any type |
Downloads
Application Description
ETS File
Accessories
PT1000 Temperature Probes:
- Probe PT1000 - assembled for SK07 (9910107)
- Sleeve Probe PT1000
- Screw-In Probe PT1000
- Pipe Feed Probe PT1000
- Pendulum Room Probe PT1000 (90100050)
- Ceiling Mounted Probe PT1000 (90100012)
- Wall Mounted Probe PT1000 (in SK03 case)
- Outdoor / Damp Room Probe PT1000 (90100007)
- Feed / Surface Mounted Probe PT1000 (90100001)
- Pendulum Room Probe PT1000 (radiant heat)(90100051)