Loading... Please wait...Currency Displayed in
- Home
- KNX Products
- Dimmers & Lighting
- PIR Sensors & Motion Detection
- Presentia W0 - ZPDW0
Categories
Related Products
Presentia W0 - ZPDW0
Hover over image to zoom
Product Description
Presence detector for in-wall flush mounting into 55x55 mm frame, with a detection area of 180º and up to 10 meters length of detection. Fitting with Tecla 55, Flat 55 family and Zennio ZS55 frames, switches and sockets. It includes several channels to be configured for lighting switching control according to luminosity threshold or according to presence detection only. It has two independent sensors whose sensitivity settings can be adjusted for each sensor individually. Master/slave configuration allows using several detectors for larger areas. Installation in standard mounting box with 55x55 frames of 1/2/3/4 module (white, anthracite or silver). Frame not included.
Function Description
- Presence Detector (PIR) with 2 adjustable-sensitivity sectors
- Detection length of up to 10m
- Lighting level sensor
- 6 presence detection channels
- Occupancy detection
- 10 logic functions
- Total data saving on KNX bus failure
- Integrated KNX BCU
- Dimensions 55.5 x 55.5 x 40mm
- Flush-mounted in back box with trim frame
- Conformity with the CE directives (CE-mark on the back side)
Technical Details
| CONCEPT | DESCRIPTION |
| Type of device | Electric operation control device |
| KNX supply - Maximum consumption 29VDC (typical) | 5.3mA / 153.7mW |
| KNX supply - Maximum consumption 24VDC | 10mA / 240mW |
| Connection type | Typical TP1 bus connector for 0.80mm Ø rigid cable |
| External power supply | Not required |
| Operation temperature | 0°C .. +45°C |
| Storage temperature | -20°C .. +55°C |
| Operation humidity | 5 .. 95% |
| Storage humidity | 5 .. 95% |
| Complementary characteristics | Class B |
| Protection class | III |
| Operation type | Continuous operation |
| Device action type | Type 1 |
| Electrical stress period | Long |
| Degree of protection | IP20, clean environment |
| Installation | With flush-mounted back box and fixing through pressure clips |
| Minimum clearances | Not required |
| Response on KNX bus failure | Data saving according to parameterization |
| Response on KNX bus restart | Data recovery according to parameterization |
| Operation indicator | The programming LED indicates programming mode (red). The motion sensor initialization, after powering up the device, is indicated through the detection LED (red blinking). The motion detections are indicated by a red flash (in case the LED is enabled). |
| Weight | 71g |
| PCB CTI index | 175V |
| Housing material | PC FR V2 halogen free housing and HDPE lens |