The PBM-06 bistable relay is used to control lighting or any other device by means of unipolar push buttons connected in a parallel way.

The relay is equipped with two independent outputs activated in accordance with a selected impulse sequence given to the (IN) inputs. It allows to control two circuits / branches simultaneously. A potentiometer, placed on the front panel, is used to choose a sequence (1 out of 5).

The control impulse can only be the “L” line signal. The trigger input structure enables cooperation with backlit push buttons (including LED backlight). The total current of backlight for the IN input can not exceed 1,5 mA.

The device is designed to be mounted in distribution boards (TH35 rail). LEDs on the front panel indicate power supply (green LED) and the correct output status (2 x red LED).

Features

- Bistable (impulse) lighting control
- Control of lighting and other devices according to a defined sequence
- Power supply indication (1 x green LED)
- Two-wire control installation
- Selection 1 out of 5 operation modes (sequences) by means of a potentiometer
- System release only from the “L” line
- Two independent relay outputs – (dry contacts) 2 NO /NC contacts with a maximum load of 16 A
- Output status indicated by red LEDs (2 x red LED)
- Possibility of cooperation with unipolar backlit push buttons
- Mounting in distribution boards (TH35 rail)

Technical details

Downloads