Although the small dimensions, this server is a powerful device designed for KNX. Through its KNX bus connector it can control lights, rollers, thermostats, HVAC and through a powerful processor it can elaborate complex logic operation on the data read from KNX. These data can also be stored in the cloud and elaborated in charts displayed on the client apps or sent via e-mail. Another important feature consists in the control of IR transmitters, which allows to control TVs and different multimedia devices through smartphones or tablets. This device provides also integration for IP doorcoms, Philips Hue and BTicino MyHome.

- Fanless processing device optimized for continuous operation
- Mass memory on MicroSD
- Power: 12-24 VDC - 1A Max
- 1x EIB/KNX port with direct connection through clips
- 1x network port
- KNX telegrams led
- Consumption 1 Watt

Features

Direct KNX connection
Linux-based appliance with direct connection to the KNX bus (no need of separate IP-router).

Unlimited KNX data-points
There aren't limitations on the number of KNX entities that can be controlled by our servers.

Dimming Regulation
The lights can be easily dimmered through a simple interface of the client app.

Blinds Control
Rollers and blinds contains KNX groups to move, to stop and to obtain a feedback of shades, blinds, etc.

Generic Timers
Switching can be temporised using two modes: the “Calendar” mode allows to set complex temporisations while the “Switch Schedule” mode allows to set six weekly temporisations.

Load Control
The loads control allows to monitor the electric energy consumption following disarm thresholds and rearm intervals.

Logics & Math
Logical operations (AND, OR, XOR) and mathematical functions based on values coming from KNX groups can be created using simple and intuitive interfaces.

IP Cameras
Visualization of IP cameras with MJPEG or RTSP video flow.

Generic Gateway
It is possible to perform actions depending on a command or a specific value sent by the KNX bus (or other integrated systems), for example it is useful to create temperature alarms.

Infrared Control
Integration of IR TRANS devices to control TVs, Blurays, Apple TV, etc. directly from ThinKnx client interface (no database required).

Light web Page
Through web interface you can control switches, shutters, thermostats and monitor sensors in the system.

Unlimited Clients
An unlimited number of clients (PCs, smartphones or tablets) can simultaneously connect to the server.

Electrical Switching
There are different kinds of switches available: on/off normally open, on/off normally close, on on pressure/off on release, on on pressure, value on pressure, etc.

RGB led
RGB leds can be controlled through KNX.

Heating & Cooling
The chronothermostat is used to interact with a KNX thermostat and allows to set weekly timers to control the temperature. The desired temperature can be hourly and daily set.

Weather Forecasts
Weather forecast can be displayed into the client application.

Scenes management
Scene is a sequence of programmed actions such as the switching on of the lights in a room. This list of action can be predetermined by the user through the scene recording function.

Analogical Values
Visualize analogical values in the client interface (for example weather data such as wind speed, outdoor temperature, etc.) and to send them to a KNX group (for example to adjust threshold values).

SMS Gateway
Service that allows to send SMS notifications when specific conditions predefined in the ThinKnx Configurator occur (no additional hardware required).

Push Notifications
Management of technical alarms with push notification messages (iOS), email and automatic page change in the ThinKnx client interface.

Report until 20MB
It allows to collect data up to 20 MB from KNX plants (both locally and on the cloud), to generate reports and to continuously store KNX telegrams (logger modality).

Technical Details

Downloads

SOFTWARE
ThinKnx UP Configurator ver. 1.3.0.9 ZIP
ThinKnx UP Client for Windows ver. 1.2.4 64bits
Other platforms

DOCUMENTATION
Datasheet
Manual
Calendar Manual
Doorcom Manual
Math Operations Manual
Weather City Codes

Server Upgrades

- DoorCom and PBX
It allows ThinKnx clients to receive VoIP calls coming from devices with VoIP technology, such as: VoIP telephones, IP intercoms (TCS, 2N, Mobotix). Enables also the VoIP PBX (SIP Server) function that handles VoIP calls on the server.

- Philips Hue
It allows to control the Philips Hue lights from KNX bus. In the ThinKnx system different rules can be created to control Hue elements (lights or groups) from KNX and to receive feedbacks from them.

- Sonos
It allows to control, in a bidirectional and fully configurable way, Sonos players.

- Extended Report
It allows to collect data from KNX plants (both locally and on the cloud), to generate reports and to continuously store KNX telegrams (logger modality).

- MyHome BTicino
It allows the bidirectional connection of MyHome BTicino plants to KNX plants. Through easy-to-fit tables it is possible to set matching among the messages coming from the two worlds.