Currency Displayed in
The eibDUO switching actuator with power supply unit consits of a 6-fold actuator, a 640/320mA power supply unit and a USB interface in one casing. It is especially suited for high loads, also capacitive loads, with high start-up peaks (C load).
The load for each channel is 16A at 250V AC, each channel can be assigned its own mains phase. Each channel is connected to a screwless twin terminal, which allows the phase to be looped through in compliance with existing regulations and two loads to be connected to the terminal. Each channel can be operated manually by a relay mover which also indicates the status of the switch.
- KNX power supply including choke, 640mA
- USB interface for KNX bus setup
- manual operation of relays without KNX bus power
- time functions, logical functions, status, scenes (32), announce function, inhibit function, hour meter
- switching capacity per channel: 16A 250VAC, suitable for C load up to 200?F
Max. Group Addresses: | 40 |
Power Supply Output: | 29V DC EIB |
Power Supply Input: | 230V AC 50..60Hz |
Protection Class: | IP 20 |
Dimensions: | 216 x 90 x 65mm (12 M) |
Installation: | 35mm DIN rail |
Mechanical Life-cycle: | 10^6 Switching Operations |
Operating Temperature: | -5 ... +45°C |
Nominal Switching Load: | 16A 250V 50..60Hz |
Max. Current Load: | 16A 250V AC 50..60Hz |
Maximum Power Load: | incandescent lamp load: 3680W flourescent lamp load: - compensated 3680W - uncomp. (Cmax. 200uF) 2500W low-voltage halogen: with transformator 2000W |