Loading... Please wait...Currency Displayed in
- Home
- KNX Products
- Inputs
- Din Rail Mounted
- KNX Multi IO 570
Categories
Related Products
KNX Multi IO 570
Hover over image to zoom
Weinzierl
Product Description
The KNX TP Multi IO 570 is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output. The peripherals can be fed by an external voltage of 24 V⎓. Channels which are configured as inputs can be used to control lights or blinds via the KNX network. They also can be used to count impulses, e.g. as interface for energy meters. Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g. Multi IO Extension 590) or jalousie relays (Multi IO Extension 592).
The integrated USB interface allows establishing a bidirectional connection between a PC and the KNX bus. The USB connector has a galvanic separation from the KNX bus. Both ETS (Version 4.2 or later) and visualization tools support this interface. The configuration of the device is done with ETS, a local download is possible. An easy to read OLED display on the front panel enables a manual operation to test the installation.
Technical Details
| Mechanical Data | |
| Housing | plastic |
| DIN rail mounted device, width | 4 modules (72 mm) |
| Weigth | approx 200 g |
| Controls & Indicators | |
| LED | display with four buttons + KNX programming LED |
| Power Supply | |
| Power Supply for I/O lines | 24 V⎓, ca. 25 mA with no load |
| KNX Bus | approx. 6 mA |
| Connectors | |
| Connector for KNX Bus | red / black |
| Pluggable screw connector (4 poles) | for power supply |
| Pluggable screw connector (12 poles) | for I/O lines |
| Connector for USB 2.0 | Micro-B |
| I/O lines | |
| Output | Open-Drain, max. 100 mA, incl. flyback diode |
| Input | Incl. pull-up resistor |
Related
Switching: Multi IO Extension 590
Shutter: Multi IO Extension 592
For KNX IP: KNX IP Multi IO 580