Currency Displayed in
The KNX-DMX Gateway is unidirectional, receives data telegrams on the KNX bus and transmits the data onto the DMX512 bus. The interface allows the DMX512 actuators to communicate via the KNX bus using the full range of the channel.
The KNX-DMX Gateway contains 8 adjustable sequence positions within the whole channel range. Individual scenes with all 512 channels can be saved and retrieved using KNX group addresses.
This function allows all channels to be connected simultaneously to one single object without causing any undo load on the KNX bus. The sequences are saved internally and can be retrieved even after a power outage.
( A sequence can only be saved 10000 times during the lifetime of the device. The automatic save function should not be set for short intervals ). The set value in sequence 8 is also „on“ for all channels when using 1 bit objects.
The KNX-DMX Gateway is ready to use and can be positioned to the main group addresses with an S1 rotary switch. It is not necessary to project via the ETS.
Dimensions: | 35 x 90 x 63 mm Rail Mounted Device ( 2 TE ) |
Protection Class: | IP20 |
Temperature Range: | -5 °C .. 45 °C |
Controls: | 3 16-level Rotary Switch 1 Button User 2 LED User 1 EIB Button+LED |
KNX-Connection: | KNX Terminal Block |
KNX-Supply: | 20 .. 32VDC / ca. 150mW |
DMX-Connector: | 3x Screw clamp 0,8mm2 |
Terminating Resistor RS485: | 120 Ohm via Jumper |
Forth - Programmierung: | USB-Slot with PC-Software Arcsuite ( Only Forth-User, for additional tools ) |
Power Supply: | 9 .. 30VDC, 100mA, internal galvanically separated, polarized,defect-proof |
DMX512 Bus: | RS485 - 250 Kbaud, incl. galvanic separation DMX512 log Please note the DMX512 specific connecting configurations ( bus connection, number of receiving slaves, bus topology ). |
Application Description
ARCUS DMX Configurator
Configurator Description
24 MONTHS