Loading... Please wait...


KNX Dali Gateway TW - 2099 REGHE

Hover over image to zoom

  • Image 1
£409.94 (inc VAT) £341.62 (exc VAT)
0.30 KGS
5 - 10 days lead time

 Product Description

Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
ETS product family: Illumination
Product type: Dimmer

Intended Use

- Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast
- Mounting on DIN rail according to EN 60715 in distribution boxes


- Control of up to 64 DALI devices in up to 32 groups
- Setting of colour temperature for luminaires with DALI Device Type 8 for tunable white acc. to IEC 62386-209
- Suitable for operation in emergency lighting systems
- Individual, group or central addressing
- 16 light scenes
- Effect control for dynamic lighting effects or colour games
- Read out DALI device state via KNX, e.g. brightness or luminaire error
- Manual operation of the DALI groups
- Restraint function
- Feedback of switching state and brightness value in bus and manual mode
- Collective feedback
- Central switching function
- Disabling function for each DALI group
- Separate ON and OFF delay
- Staircase lighting timer with pre-warning function
- Corridor function: when combined with motion detectors, reduced continuous lighting, if no motion is detected
- Online or offline project design of the DALI devices with ETS plug-in
- Short-circuit protection
- Surge voltage protection
- Overload protection
- Operating hours counter
- Signal of the global switching status of the DALI devices, e.g. to switch off the mains voltage of the DALI devices to avoid standby losses
- An individual DALI device can be exchanged during operation without software
- Linear or logarithmic dimming characteristic can be selected

Technical Details

Rated voltage: AC 110 ... 240 V ~, 50/60 Hz
Rated voltage: DC 110 ... 240 V
Power loss: max. 3 W
Ambient temperature: -5 ... +45 °C
Storage/transport temperature: -25 ... +70 °C
Rated voltage DALI: DC 16 V
Number of DALI devices: max. 64
DALI transmission rate: 1.2 kbit/s
DALI protocol: EN 62386
Cable type: Sheathed cable 230 V, e,g. NYM
Cable length DALI
with 1.5 mm²: max. 300 m
with 1.0 mm²: max. 238 m
with 0.75 mm²: max. 174 m
with 0.5 mm²: max. 116 m
Mounting width: 72 mm (4 rail units)
Connection, power supply and DALI
Connection mode: screw terminals
single wire: 0.5 ... 4 mm²
stranded without ferrule: 0.5 ... 4 mm²
stranded with ferrule: 0.5 ... 2.5 mm²
KNX medium: TP 256
Rated voltage KNX: DC 21 ... 32 V SELV
Power consumption KNX: typical 150 mW
Connection, KNX: terminal



Operating Instruction
ETS File

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


What's News


I would like to receive occasional newsletters regarding new products and promotions.

Follow us on

Copyright 2024 Home of Technologies Limited. All Rights Reserved.
 Sitemap | Our Privacy Policy | Store devoleped and designed by Home of Technologies marketing department

Click the button below to add the KNX Dali Gateway TW - 2099 REGHE to your wish list.