Loading... Please wait...Currency Displayed in
Enables humidity control devices to be switched on according to needs.
- Passive measuring element
- Temperature measurement in dry rooms
- Variants with setpoint adjuster, presence button and status LED
| The tolerance listed below applies only to the corresponding measuring element. The accuracy of the sensor depends on the cable length and the measuring element used. | |||
| Measuring Element | Standards | Nominal Value | Tolerance at 0 °C |
| Ni500 | DIN 43760 | 1000 Ω at 0 °C | ±0.4 K |
| Ni1000 | DIN 43760 | 2 | ±0.4 K |
| Pt100 | DIN EN 60751 | 100 Ω at 0 °C | ±0.3 K |
| Pt1000 | DIN EN 60751 | 1000 Ω at 0 °C | ±0.3 K |
| The tolerance listed below applies only to the corresponding measuring element. The accuracy of the sensor depends on the cable length and the measuring element used. | |||
| Type | Measuring Range | Output Signal | Adjuster |
| EGT330F052 | -35...70 °C | Passive, Ni500 | - |
| EGT330F102 | -35...70 °C | Passive, Ni1000 | - |
| EGT332F102 | -35...70 °C | Passive, Ni1000 | Resistor signal 2.5 kΩ |
| EGT335F102 | -35...70 °C | Passive, Ni1000 | Resistor signal 2.5 kΩ |
| EGT430F012 | -35...70 °C | Passive, Pt100 | - |
| EGT430F102 | -35...70 °C | Passive, Pt1000 | - |
| EGT 335 with presence button and 3 LEDs | |||
| Type | Measuring Range | Measuring Accuracy at 21 °C | Output Signal | Power Supply | Power Consumption | Adjuster |
| EGT130F031 | 3 temperature ranges, adjustable on device (see connection diagram) | Typ. ±1% of measuring range | Active, 0...10 V, min. load 5 kΩ | 15...24 V= (±10%)/24 V~ (±10%) | Max. 12 mA/24 V= | - |