DM01D01ACC is slave module to DM01D01KNX KNX power dimmer with identical characteristics to the Master power dimmer and is connected to it by a local two wires bus. 

- Trailing Edge: The dimmer turns off part of the final part of the waveform of the input voltage resulting in reduced lamp output. This load regulation is used for resistive or capacitive loads (typically halogen lamps with electronic transformer or incandescent lamps). 

- Leading Edge: The dimmer turns off part of the initial part of the waveform of the input voltage, resulting in reduced lamp output. This load regulation is used for inductive loads (typically ferromagnetic transformers or toroidal). 

The three channels are independent and can therefore operate on different phases of the same three phase systems respecting the limit of 230Vac between phase and neutral.

Downloads

ETS File
Datasheet
Manual
Configuration example
Drawing Master
Drawing Slave