Currency Displayed in
For connecting eight conventional devices with AC 230 V outputs to the KNX.
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.
- Switching
- Dimming or blind control via 1 or 2 inputs
- Positioning values for blind control (8-bit)
- Pulse edges with 1-, 2-, 4-, or 8-bit telegrams
- Differentiation between short/long operation
- Initialisation telegram
- Cyclical sending
- Pulse edges with 2-byte telegrams
- 8-bit linear regulator
- Disable function
- Break/make contact
- Debounce time
Range: | KNX |
Product or component type: | Binary Input |
BUS type: | KNX |
Total number of 18 mm modules: | 4 |
Wiring device mounting: | DIN rail |
[Ue] Rated operational voltage: | 230 V AC 50 Hz |
Number of inputs: | 8 |
Input type: | Binary |
Local signalling: | LED |