Currency Displayed in
Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.
With integrated bus coupling unit. For wall mounting in a size 60 mounting box, optimal installation at 2.2 m. With anti-crawl protection.
- Five movement/presence blocks: up to four functions can be triggered per block
- Telegrams: 1 bit, 1 byte, 2 bytes
- Normal operation, master, slave, monitoring, safety pause, disable function
- Two movement sensors: the sensitivity and range can be set separately for each sensor
- Self-adjusting staircase timer
- Actual brightness value: can be detected via the internal and/or an external light sensor
- Actual value correction
Frames for this product are sold separately here: link
Angle of detection: | 180° |
Range: | 8 m right/left, 12 m to the front (for a mounting height of 2.20 m) |
Mounting height: | 2.2 m or 1.1 m at half the range |
Time: | adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS) |
Number of levels: | 6 |
Number of zones: | 46 |
Number of movement sensors: | 2, separately adjustable |
Light sensor: | internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX |
EC Directives: | Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC |
KNX- ARGUS Presence Detector 180/2.20 m flushmounted-Operating instructions (EN) (Version 0)
KNX ARGUS presence detector 180/2.20 m, Application description, EN (Version V 1.0)