Currency Displayed in
The KNX-Modul SK08-Ventil4 enables the control of up to 4 actuators or mixing valves in the heating / cooling system.
There are 0-12VDC for linear control valves or a 24V DC-PWM for thermal control valves in the heating / cooling system avaiable.
The device has an integrated KNX bus coupler and needs additional voltage.
The transducer is located in a high-strength, extremely robust stable impact ABS plastic housing. Cover and base have a revolving groove and tongue system with neoprene gasket. The housing is IP54/65.
The sensor is configured with ETS ( KNX Tool Software ) and the application program. Controlling functions such as signal threshold and diverse adjustments are set using ETS ( KNX Tool Software ).
- control of up to four actuating drives or mixing valves in the heating system
- for linear and thermal control valves
Operating Voltage: | KNX Busspannung 21 .. 32VDC |
Power Consumption: | Approx. 240mW ( at 24VDC ) |
Terminal bus voltage: | KNX 2-pin terminal ( red / black ) |
Auxiliary Supply: | 9 .. 32VDC / 18W max. |
Terminal Auxiliary Supply: | WAGO 2-pin terminal ( yellow / white ) |
Controller Types: | PI Controller with PWM Output PI Controller with Steady Output Steady Input with PWM Output Steady Input with Steady Output Switching Input with Switched Output 2 Point Controller with switched Output |
Bus Coupler: | Integrated |
Ambient Temperature: | Storage -20 .. +85°C Operation -5 .. +45°C |
Ambient Humidity: | to 95% non-condensing |
Start-up with ETS: | Arcus-Ventil4_v13.knxproj |
Protection Class: | IP54/65 |
Casing: | ABS plastic grey ( 115 x 65 x 55 ) mm ( L x W x H ) |
Article number: | 65102008 |