Currency Displayed in
For independent switching of eight loads via make contacts. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022.
The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded.
- Operation as break or make contact
- Delay functions for each channel
- Staircase lighting function with/without manual OFF function
- Cut-out warning for staircase lighting function
- Blocking and additional logic operation or priority control
- Scenes
- Status feedback function per channel
- Central function
- Comprehensive parameterisation for bus voltage failure and recovery
- Parameterisable download behaviour
BUS type: | KNX |
Number of contacts: | 8 |
Total number of 18 mm modules: | 4 |
Mounting support: | DIN rail |
[Ue] Rated operational voltage: | 230 V |
Network frequency: | 50...60 Hz |
[In] Rated current: | 6 A |
Load type: | Fluorescent lamps : <= 1000 VA, 230 V AC Incandescent lamps : <= 1380 W, 230 V AC Halogen lamps : <= 1380 W, 230 V AC Capacitive : 6 A - 105 µF, 230 V AC |
IP degree of protection: | IP20 |