Currency Displayed in
KNX SW ACT REG-K8X23016 MANUAL
For independent switching of 8 loads via make contacts. All 230 V switch outputs can be operated with manual switches. With integrated bus coupler. For installation on DIN rails EN 50022.
The device is connected to the mains via screw terminals; every second L connection is bridged internally. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded.
- Operation as break or make contact
- Delay functions for each channel
- Staircase lighting function with/without manual OFF function
- Cut-out warning for staircase lighting function
- Blocking and additional logic operation or priority control
- Scenes
- Status feedback function per channel
- Central function
- Comprehensive parameterisation for bus voltage failure and recovery
- Parameterisable download behaviour
BUS type: | KNX |
Number of contacts: | 8 |
Total number of 18 mm modules: | 8 |
Mounting support: | DIN rail |
[Ue] Rated operational voltage: | 100...240 V |
Network frequency: | 50...60 Hz |
[In] Rated current: | 16 A |
Load type: | Parallel compensated fluorescent lamp : <= 1086 VA, 100 V AC Parallel compensated fluorescent lamp : <= 2500 VA, 230 V AC Parallel compensated fluorescent lamp : <= 2608 VA, 240 V AC Incandescent lamps : <= 1600 W, 100 V AC Incandescent lamps : <= 3600 W, 230 V AC Incandescent lamps : <= 3840 W, 240 V AC Halogen lamps : <= 1086 W, 100 V AC Halogen lamps : <= 2500 W, 230 V AC Halogen lamps : <= 2608 W, 240 V AC Capacitive : 16 A - 200 µF, 100...240 V AC |
IP degree of protection: | IP20 |