Currency Displayed in
For independent switching of up to 4 loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation. With integrated bus coupler. For installation on DIN rails EN 50022.
Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation.
- Operation as break contact/make contact
- Programmable behaviour for download
- Delay functions for each channel
- Staircase lighting function with/without manual OFF function
- Cut-out warning for staircase lighting function
- Scenes
- Central function
- Disable function
- Logic operation or priority control
- Status feedback function for each channel
BUS type: | KNX |
Number of contacts: | 4 |
Total number of 18 mm modules: | 4 |
Mounting support: | DIN rail |
[Ue] Rated operational voltage: | 230 V |
Network frequency: | 50...60 Hz |
[In] Rated current: | 10 A |
Local signalling | LED |
Load type: | Fluorescent lamps : <= 1800 VA, 230 V AC Incandescent lamps : <= 2000 W, 230 V AC Halogen lamps : <= 1700 W, 230 V AC Capacitive : - 105 µF, 230 V AC |
IP degree of protection: | IP20 |