Currency Displayed in
For independent switching of 12 loads via make contacts. All switch outputs can be operated with manual switches. With integrated bus coupler.
A green LED indicates readiness for operation after the application has been loaded. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.
- Staircase lighting function with/without manual OFF function
- Cut-out warning for staircase lighting function
- Logic operation
- Status feedback per channel
- Central function
- Parameterisation for bus voltage failure and recovery
BUS type: | KNX |
Number of contacts: | 12 |
Total number of 18 mm modules: | 12 |
Mounting support: | DIN rail |
[Ue] Rated operational voltage: | 100...240 V |
Network frequency: | 50...60 Hz |
[In] Rated current: | 16 A |
Load type: | Parallel compensated fluorescent lamp : <= 900 VA, 100 V AC Parallel compensated fluorescent lamp : <= 2000 VA, 230 V AC Parallel compensated fluorescent lamp : <= 2000 VA, 240 V AC Incandescent lamps : <= 1600 W, 100 V AC Incandescent lamps : <= 3600 W, 230 V AC Incandescent lamps : <= 3840 W, 240 V AC Halogen lamps : <= 2500 W, 230 V AC Halogen lamps : <= 1080 W, 100 V AC Halogen lamps : <= 2500 W, 240 V AC Capacitive : 16 A - 105 µF, 100...240 V AC |
IP degree of protection: | IP20 |