Currency Displayed in
The quick 4-fold shutter/blind-control actuator can control 4 independent shutter/blind motors. The load for each channel is 6A at 250V AC, each channel can be assigned its own mains phase.
Programming the devices is usually done with the rotary-encoder switches. Whenever needed, programming via the ETS is possible, like any other standard KNX device.
- 4 channels for 4 independent electrical drives
- Blind / shutter mode individually selectable per channel
- Switching capacity per channel: 6A 250VAC
- Mechanical contact locking for each channel
- Programmable via ETS with coding switches set to 0
Max. Group Addresses: | 32 |
Power Supply: | 24V DC via KNX |
Auxillary Power Supply: | Not Necessary |
Protection Class: | IP 20 |
Dimensions: | 71 x 90 x 60 (4 M) |
Installation: | 35mm DIN rail |
Mechanical Life-cycle: | 106 Switching Operations |
Operating Temperature: | -5 ... +45°C |
Rated Load per Contact: | 6A / 250V AC 50..60Hz |