Currency Displayed in
For connecting devices with 0-10 V interface to KNX. With integrated bus coupler and screw terminals (230 V) or plugin screw terminals (0-10 V). The 230 V switch output can be operated with a manual switch. For installation onto DIN rails EN 50022.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
- Different dimming curves and dimming speeds
- The same dimming time
- Memory function
- ON/OFF delay
- Staircase time function with/without manual OFF function
- Scenes (up to eight stored brightness values can be retrieved)
- Central function
- Logic operation or priority control
- Blocking function
- Status feedback
- Behaviour on bus voltage recovery
BUS type: | KNX |
Total number of 18 mm modules: | 2.5 |
Mounting support: | DIN rail |
[Ue] Rated operational voltage: | 100...240 V AC V @ 50/60 Hz |
Input current: | 0.12...100 mA |
Analogue output type: | Voltage |
Analogue output range: | 1...10 V |
Number of outputs: | 1 |
[In] rated current: | 16 A |
Load type: | Parallel compensated fluorescent lamp : <= 1086 VA, 100 V AC Parallel compensated fluorescent lamp : <= 2500 VA, 230 V AC Parallel compensated fluorescent lamp : <= 2608 VA, 240 V AC Incandescent lamps : <= 1600 W, 100 V AC Incandescent lamps : <= 3600 W, 230 V AC Incandescent lamps : <= 3840 W, 240 V AC Halogen lamps : <= 1086 W, 100 V AC Halogen lamps : <= 2500 W, 230 V AC Halogen lamps : <= 2608 W, 240 V AC Capacitive : , 16 A, 200 µF, 100...240 V AC |
IP degree of protection: | IP20 |