Loading... Please wait...Currency Displayed in
Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Shutter
Product type: Shutter
- Switching of electrically driven blinds, shutters, awnings and similar hangings for AC 110-230 V mains voltage or DC 12-48 V extra-low voltage
- Mounting on DIN rail in distribution boxes
- Suitable for 110 ... 230 V AC motors and 12 ... 48 V DC motors
- Automatic operation time detection for 230 V motors can be set
- Slat position directly controllable
- Acknowledgement of travelling state and slat position in bus and manual mode
- Scene function
- Top and bottom forced position via higher-level controller
- Sun protection function
| Outputs: | 4 channels AC 110 ... 230 V, 2 channel DC 12 ... 48 V |
| Power supply mains: | AC 110 V (- 10 %) ... 240 V (+10 %) |
| Mains frequency: | 50/60 Hz |
| Connection | |
| Connection mode: | screw terminals |
| single wire: | 0.5 ... 4 mm² |
| stranded without ferrule: | 0.5 ... 4 mm² |
| stranded with ferrule: | 0.5 ... 2.5 mm² |
| Breaking capacity AC1: | 6 A (230 V) |
| Switching current DC 12/24 V: | 6 A |
| Switching current DC 48 V: | 3 A |
| Max. blind/shutter running time: | 20 min |
| Power loss: | max. 4.5 W |
| Ambient temperature: | -5 ... +45 °C |
| Storing temperature: | -25 ... +70 °C |
| Approvals: | VDE |