Currency Displayed in
For independent control of up to 12 blind/roller shutter drives or for switching up to 24 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons. With integrated bus coupler. For installation on DIN rails EN 50022.
The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation.
Blind functions:
- Blind type
- Running time
- Idle time
- Step interval
- Weather alarm
- 8-bit positioning for height and slats
- Scenes
- Status and feedback functions
Switch actuator functions:
- Operation as break contact/make contact
- Programmable behaviour for download
- Delay functions for each channel
- Staircase lighting function with/without manual OFF function
- Cut-out warning for staircase lighting function
- Scenes
- Central function
- Disable function
- Logic operation or priority control
- Status feedback function for each channel
BUS type: | KNX |
total number of 18 mm modules: | 12 |
Mounting support: | DIN rail |
[Ue] Rated operational voltage: | 100...240 V AC 50...60 Hz |
[In] rated current: | 10 A |
Number of outputs: | 12 |
Load type: | Parallel compensated fluorescent lamp : <= 434 VA, 100 V AC Parallel compensated fluorescent lamp : <= 1000 VA, 230 V AC Parallel compensated fluorescent lamp : <= 1043 VA, 240 V AC Motor : 434 W, 100 V AC Motor : 1000 W, 230 V AC Motor : 1043 W, 240 V AC Incandescent lamps : <= 869 W, 100 V AC Incandescent lamps : <= 2000 W, 230 V AC Incandescent lamps : <= 2086 W, 240 V AC Halogen lamps : <= 739 W, 100 V AC Halogen lamps : <= 1700 W, 230 V AC Halogen lamps : <= 1773 W, 240 V AC Capacitive : , 10 A, 105 µF, 100...240 V AC |
IP degree of protection: | IP20 |