Currency Displayed in
KNX movement detector for outdoors. 220° surface monitoring for large house fronts and sections of the house. With integrated bus coupler. The physical address is programmed with a magnet.
- 360° short-range zone (approx. 4 m radius).
- Large wiring compartment and plug system.
- Looping is possible.
- LED function display for fast alignment at the installation site.
- Operating elements are protected under the easily accessible cover plate.
- Flexibly adjustable sensor head.
- Possible to blank out individual lens areas.
Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.
- Five movement blocks: up to four functions can be triggered per block.
- Telegrams: 1 bit, 1 byte, 2 bytes.
- Normal operation, master, slave, safety pause, disable function.
- Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer.
- Self-adjusting staircase timer.
Product or component type: | Movement sensor |
BUS type: | KNX |
Number of channels: | 20 5 |
Protection type: | Creep zone protection |
Type of setting: | Light sensitivity adjustable |
Duty cycle: | 9144 minutes |
Time delay range: | 0...1 s for switch-on |
Movement detection area: | 24 m |
Horizontal detection angle: | 0...220 ° |
Device mounting: | Surface |
Mounting height: | 2.5 m |
Detection face: | Lateral 16 m |