Loading... Please wait...Currency Displayed in
- Home
- KNX Products
- Shutters & Sun Protection
- JMG 4 T 24V KNX
Categories
Related Products
JMG 4 T 24V KNX
Hover over image to zoom
Theben
Product Description
Function description:
- 4-way blind actuator 24V MIX2
- Base module MIX2
- Can be upgraded to maximum of 12 channels
- For controlling 24V drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
- Up to 2 extension modules can be connected to a base module
- Up to two extension modules MIX or MIX2 can be connected to one base module
- Device and KNX bus module can be swapped independently of each other
- Removable KNX bus module enables devices to be changed without reprogramming
- Manual set-up and use of actuators is possible without KNX bus module
- Free combination of switches, dimming, blinds and heating control as well as binary inputs
- For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
- Manual operation on device (even without bus connection)
- LED Up and Down switching status display for each channel
- Potential-free contacts for Up and Down per channel
- Setting option for phase sequence and running time of deives
- Copy function for fast configuration
Technical Details
| Operating voltage KNX | Bus voltage, ≤4 mA |
| Operating voltage | 110 - 240 V AC 50 - 60 Hz |
| Stand-by consumption | ~0.3 W |
| Number of channels | 4 |
| Width | 4 modules |
| Installation type | DIN rail |
| Type of connection | Terminal screws | Bus connection: KNX bus terminal |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Output | Changeover contact, 6 A |
| Switching capacity | 6 A at 24 V DC |
| Switching output | Potential-free, for SELV, if the whole device switches SELV |
| Ambient temperature | -5°C ... 45°C |
| Type of protection | IP 20 |
| Protection class | II according to EN 60 669 |