IP Router CL can be used as line coupler or area coupler with a IP based backbone or main line, through KNXnet/IP Routing protocol. It also allows programming or monitoring a device from the IP network (PC, BMS system...) by using KNXnet/IP Tunneling protocol. It does not need external power supply nor PoE.

Features

- KNXnet/IP tunneling protocol (up to 4 simultaneous connections).
- KNXnet/IP routing protocol.
- Support of long messages (max. 240 byte APDU length).
- Neither auxiliary power nor PoE is needed.
- Load bus diagram from last hour.
- Manual function enable/disable button.
- Ethernet 10/100 BaseT IP (Fast Ethernet).
- Parameterizable filtering for addresses 14/X/X and onwards.
- Dimensions 90 x 71 x 36mm (2 DIN units).
- DIN rail mounting (EN 50022), through pressure.
- Integrated KNX BCU.
- Conformity with the CE directives (CE-mark on the backside).

Downloads

Datasheet
Manual
ETS File