KNX Shop Online: New Products - Energy & Measurement Monitors

Kamstrup Solar Heat Meter

Thu, 02 Apr 2020 07:41:45 +0000

- electronic energy calculator for heat
- solar impulse unit, suitable for glycol
- correction value not adjustable
- needs 230V supply
- including KNX bus coupling unit inside the meter
- full FacilityWeb functionality
- price including calibration fee
..

Kamstrup Ultrasonic Cooling Meter Multical 603

Thu, 02 Apr 2020 07:41:43 +0000

- electronic cooling meter
- accuracy class 2
- MID approval according to DIN EN 1434
- ultrasonic flow sensor
- calculator detachable from flow sensor, wall mounting set included
- two temperature sensors with 1.5m cable
- up to Qp 6 m3/h short direct sensor..

Kamstrup Ultrasonic Heat & Cooling Meter Multical 603

Thu, 02 Apr 2020 07:41:40 +0000

- electronic heat and cooling meter
- accuracy class 2
- MID approval according to DIN EN 1434
- ultrasonic flow sensor
- calculator detachable from flow sensor, wall mounting set included
- two temperature sensors with 1.5m cable
- up to Qp 6 m3/h short dire..

Kamstrup Ultrasonic Heat Meter Multical 603

Thu, 02 Apr 2020 07:41:38 +0000

- electronic heat meter
- accuracy class 2
- MID approval according to DIN EN 1434
- ultrasonic flow sensor
- calculator detachable from flow sensor, wall mounting set included
- two temperature sensors with 1.5m cable
- up to Qp 6 m3/h short direct sensor in..

KNX Home Weather Station - 2224 WH

Thu, 19 Mar 2020 08:52:00 +0000

The KNX weather station detects the meteorological data "Wind speed", "Precipitation", "Twilight", "Temperature" and the brightness in three directions. Its main area of application is the automatic, weather-dependent control of shading. It is specially designed for use in homes. To increase fu..

Price: £495.04

KNX Energy Detector 3-G - 2103 REG ES

Mon, 02 Mar 2020 16:32:22 +0000

Rail mounting device, 4 rail units
ETS product family: Physical sensors
Product type: Energy detector

Characteristics

The energy detector has three channels for connecting loads to up to three separate phases with a common neutral conductor. Each channel can measure:..

Price: £255.51

KNX-WTS-GPS

Tue, 04 Jun 2019 15:47:27 +0000

- Weather station with sensors, evaluation electronics and bus connection in a compact housing
- Values can be used to control threshold-depending switching outputs
- Detection of the position of the sun via GPS signal (azimuth and elevation) for an automatic control of the sun shield..

Price: £1,147.80

ZENNIO - KES Plus - ZIO-KESP

Tue, 24 Apr 2018 16:17:48 +0000

Zennio electrical energy meter for single-phase or three-phase systems. It can measure and notify in KNX system, not only the consumed or produced energy (KWh), but also the associated cost according to 6 different tariffs, the CO2 emissions, instant active and reactive power, power factor and ..

Price: £148.50

SK08-AN2 2 Channel Analog Module

Wed, 28 Feb 2018 13:55:20 +0000

The KNX controller SK08-AN2 is part of the S8 device series and serves to measure two analog voltage values between 0 and 12VDC.

The sensor / controller has two ports, each with a ground, a signal input and a supply voltage pin ( e.g. for a sensor ).

The device has an integrated K..

Price: £147.96

KNX-WZ-R5.M - Heat Quantity Meter

Thu, 29 Jun 2017 11:24:51 +0000

The heat quantity meter is a calibrated heat quantity meter "WZ-R5.M" from NZR equipped with an internal KNX bus coupling unit from Arcus-EDS GmbH.
The counter has a MID according to the measuring instrument directive.
The electronic counting unit is equipped with a lithium battery wh..

Price: £279.58