KNX Shop Online: New Products - System

Loudspeaker 6.5'' 8 Ohms - ZAC-LS3

Thu, 24 Jan 2019 15:52:04 +0000

Loudspeaker 6.5'' 8 Ohms for AudioInRoom

Features

- 6.5’’ coaxial audio loudspeaker.
- Compact loudspeaker with white metallic grille and adjustable plastic clamps.
- Built-in 25mm tweeter.Price: £59.20

Loudspeaker 3.5'' 4 Ohms - ZAC-LS4

Thu, 24 Jan 2019 15:43:37 +0000

Loudspeaker 3.5'' 4 Ohms for AudioInRoom

Features

- 3.5’’ coaxial audio loudspeaker.
- Compact loudspeaker with white metallic grille and fixing springs.
- Built-in 20mm tweeter.
- Flush..

Price: £45.33

Power Supply 24 VDC (2.5 A) - ZPS-AUX1

Thu, 24 Jan 2019 15:32:16 +0000

Power supply for AudioInRoom + Access control 24 VDC/2.5 A.

Features

- Power supply of 24VDC and up to 2.5A.
- External 110/230VAC@50/60Hz power supply.
- Short-circuit and overload protection.
- Status indicator LED.
- Efficiency of 85 to 90%
- Dimens..

Price: £65.68

KNX power supply 320mA - ZPS-320HIC230

Tue, 24 Apr 2018 16:17:46 +0000

KNX System Power Supply with additional 29VDC output. Maximum current 320mA (KNX bus plus additional output consumption). Reset button and overload status LED, shortcircuit and overload protection. 230 V ~ 50/60Hz input voltage. Installation in DIN rail (4.5 units).

Features

- K..

Price: £152.95

KNX Power Supply 640mA - ZPS-640HIC230

Tue, 24 Apr 2018 16:17:46 +0000

KNX System Power Supply with additional 29VDC output. Maximum current 640mA (KNX bus plus additional output consumption). Reset button and overload status LED, shortcircuit and overload protection. 230 V ~ 50/60Hz input voltage. Installation in DIN rail (4.5 units).

Features

- K..

Price: £183.35

KNX USB SC - ZSYUSBSC

Tue, 24 Apr 2018 16:17:46 +0000

KNX installations programmer via USB. KNX and USB Status LED. ETS detects the KNX-USB Interface after connecting to the computer. It allows monitoring the KNX bus with ETS.

Features

- Maximum APDU length supported: 220 bytes.
- USB 2.0 with cEMI protocol is supported.
Price: £169.60

IP Router CL - ZSYIPRCL

Fri, 27 Nov 2015 13:03:40 +0000

IP Router CL can be used as line coupler or area coupler with a IP based backbone or main line, through KNXnet/IP Routing protocol. It also allows programming or monitoring a device from the IP network (PC, BMS system...) by using KNXnet/IP Tunneling protocol. It does not need external po..

Price: £305.04

KIPI KNX-IP Interface - ZSYKIPI

Fri, 27 Nov 2015 12:46:44 +0000

KIPI allows bidirectional communication between Ethernet and a KNX TP installation. It allows addressing, programming or monitoring components located in a KNX TP network from the Ethernet side by using KNXnet/IP Tunneling protocol, with up to 5 parallel connections. It supports extended ..

Price: £174.80

Zennio - KNX Power Supply 160mA - ZPSU160

Mon, 07 Sep 2015 11:09:54 +0000

KNX power supply 160mA. 2 DIN rail units. ZPSU160 is a KNX 160mA power supply. This power supply is ideal for small KNX installations. It includes an integrated choke. Additional 29VDC output. Max. 160mA.

Features

- Reduced size: 90 x 60 x 35 mm (2 DIN rail units).<..

Price: £117.80

Linecoupler CL - ZSYLCCL

Mon, 07 Sep 2015 11:09:37 +0000

Linecoupler is the KNX line coupling and line-repeating solution. It connects lines with galvanic isolation filter. Telegram dropping to reduce traffic.

Features

- Long messages up to 250 bytes.
- 6 Status LED.
- Low current consumption.
- Manual function enable/d..

Price: £218.50