Currency Displayed in
The rain sensor is used to record and evaluate precipitation and is intended for external mounting. A sensor evaluates the conductivity of the rainwater. The heating is controlled by a microprocessor which supplies an output signal of 0 V or 10 V. The end of the rainfall can be recorded almost immediately with the help of an in-built heater. The heater requires an additional voltage of 24 V AC or DC.
For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor.
Output: | 0 V dry, 10 V rain |
External power supply: | Voltage: 24 V DC (15-30 V DC) Power consumption: approx. 10 mA (without heating) |
Heating: | 24 V DC/AC max. 4.5 W |
Type of protection: | IP 65 |
Incoming cable: | 3 m, UYY 5 x 0.25 mm2 |
Fixing method: | Mounting bracket |
Mounting position: | approx. 45° |