The quick series binary inputs can generate bus telegrams on 4 independent channels. The sensing voltage required is supplied by the devices from bus voltage( BE4FK-Q) or is 230V (BE4F230-Q).
Each channel is connected to a screw terminal.
Programming the devices is usually done with the rotary-encoder switches. Whenever needed, programming via the ETS is possible, like any other standard KNX device.
Max. Group Addresses: |
34 |
Input Voltage: |
Potential free max.100m |
Auxillary Power Supply: |
Not Necessary |
Protection Class: |
IP 20 |
Dimensions: |
71 x 90 x 60 (4 M) |
Installation: |
35mm DIN rail |
Operating Temperature: |
-5 ... +45°C |